CALL US AT: 860.628.9090

HANSFORD DIE HANDLER, MODEL #1020, S/N #461 [STK# 1485]

Eric Kubeck

SPECIFICATIONS:

  • Lower Platen …………………………………………………   24” x 44.5”
  • Upper Platen …………………………………………………   24” x 44.5” /Adjustable Mtg. Plates
  • Shut Height …..………………………………………………    8”
  • Upper Platen Movement ..……………………………………  Vertical – 20”
  • Vertical Movement (Power) …………………………………. 13” min
  • Vertical Movement (Hand Crank) …………………………… Manual: 48 Turns / Inch

Try-Out: 384 Turns / Inch

  • Mounting of Dies …………………………………………….  Lower: (6) T Slots 24” long per ¾” Bolts

Upper: (4) T Slots 8 ½” long per ¾ Bolts

  • Open HT (Between Platens) ………………………………….  28”
  • Capacity Weight ………………………………………………  3000 lbs.
  • Max Tonnage Try-Out Force ………………………………… 20 Tons
  • Locking Position (Upper Platen) ……………………………. 0° & 180°
  • Manual Rotation of Top Platen ………………………………. 48 Turns/3600
  • Capacity ……………………………………………………… 3,000 lbs.
  • Motor ….……………………………………………………… 5HP/ 220/480V/ 1750 RPM / IR
  • Weight (approx.) ……………………………………………. 3,500 lbs.

 

EQUIPPED WITH:

  • T-slots in upper and lower platen
  • Portable casters
  • Control with Magnetic Reversing Starter

 

CWP 80 LB TRAVERSE SPOOL DECOILER, MODEL: TRSP – NC [ 3 AVAILABLE] [STK# 1490-1492]

Eric Kubeck

SPECIFICATIONS:

  • Maximum Spool Weight …………………………….. 80 lb.
  • Maximum Spool Width ……………………………… 7″
  • Maximum Spool Diameter …………………………… As Needed
  • Payoff Rate ………………………………………….. 0-57 RPM
  • Arbor Diameter ……………………………………… 1.50″
  • Weight (Approx) ……………………………………. 150 Lb.
  • Voltage ……………………………………………… 110V/1PH/60HZ

EQUIPPED WITH:

  • Model RC4000 Loop Control
  • Dancer Arm
  • Keeper Arms
  • DC Variable Speed Drive

CINCINNATI HYDRAULIC SHEAR, MODEL 4S12, SERIAL # 42524, YEAR 1985, STK# 1281

Eric Kubeck

SPECIFICATIONS

  • Max cutting width                           144″
  • Cutting thickness (mild steel)       1/2″
  • Strokes per minute                          30
  • Height of table above floor             42″
  • Number of hold downs                    15
  • Hold down tonnage                          26-1/2 ton
  • Gap length                                          16”
  • Rake angle                                          7/16
  • Motor                                                  40 HP
  • Electrics                                              230/460V/3PH
  • Weight approx.                                  34,000 lbs.

 

EQUIPPED WITH

  • 36″ front operated power back gauge
  • (2) sheet supports
  • 10 Ft. squaring arm
  • Electric foot switch
  • Adjustable blade gap
  • Selector switch for single – off – continuous
  • T-slotted bed
  • Roller balls in bed

20 TON MINSTER DIE CUSHION [STK# 877]

Eric Kubeck

SPECIFICATIONS:
• Tonnage (at 10 P.S.1) …………………   1.27
• Cushion Draw ……………………………   0″-4″
• Standard Pin Pads
• L-R ………….………………………………    19″
• F-B …………………………………………     19″
• Circle ………………………………………    16″
• Height Standard Draw ………………   22″

Mounting may be made to the Bolster Plate, Press Frame or to the bed-superstructure.