20 TON RECONDITIONED MINSTER STRAIGHT SIDED POWER PRESS, MODEL P2-20-24 PIECEMAKER, S/N 14586, [STK# 1223]

Tony Amato

SPECIFICATIONS:

  • Tonnage ……………………………  20
  • Stroke ………………………………   1-1/4”
  • Speed …………..(Variable)……   0-600 SPM
  • Slide adjustment ………………    2”
  • Shut HT (S.D.A.U.) ……………  11-1/4”
  • Bed area …………………………     19” x 24”
  • Side window width……………    7-1/2”
  • Motor …Variable speed …..      7 HP
  • Electrics …………………………    230/460

 EQUIPPED WITH:

  • Minster air clutch and brake
  • New Cieco OSHA compliant press control
  • Wintriss Procam 1500
  • Waddington 6” wide servo feed
  • Die protection
  • Recirculating lubrication system
  • 3” Bolster plate
  • Press mounts

Very Good Condition

May be seen under power on our floor

32 TON REMANUFACTURED MINSTER HIGH SPEED GAP FRAME PRESS, MODEL #B1-32, S/N # 15811, [STK# 1237]

Tony Amato

SPECIFICATIONS:

  • Capacity ………………………………………………………….. 32 Ton
  • Length of stroke …………………………………………………. 1-1/2”
  • Strokes per minute ………(variable) ………………….………… 0-600
  • Slide adjustment …………………………………………………. 2-1/4”
  • Shut height …. (SDAU) …………….…………….……………. 11-3/4”
  • Bed area ………………………………………………………….. 15″ x 24″
  • Motor ……………..……………………………………………… 3 HP
  • Electrics ………………………………………………………….. 220/440/3 PH
  • Weight…………………………………………………………….. 5,000 lbs

STAMPTECH’S REMANUFACTURING PROCESS INCLUDES:

  • Complete Press Teardown
  • Cleaning and Inspection of all parts and comparing them to original specifications
  • Remachining of Crown Bearing Bores, Connection Bores, Gibs Slide and Bolster as required to meet specifications
  • Replacement of all Bronze Bushings, Bearings, Oil Seals, Packing and other wear items
  • Installation of a New Lubrication System
  • Installation of a New Pneumatic System
  • Upgrading to the latest Safety requirements
  • Retention of a Permanent Record for the life of the Remanufactured Equipment
  • 1 Year Warranty

EQUIPPED WITH:

  • Air Clutch and Brake
  • New OSHA compliant press control
  • All new electrics
  • Recirculating lubrication system
  • Bronze Gibbs
  • 2” Bolster plate
  • Press mounts

 

May be seen under power on our floor

100 TON RECONDITIONED MINSTER STRAIGHT SIDED PRESS, MODEL # P2-100-48 PIECEMAKER, SERIAL # 19460 [STK# 1233]

Tony Amato
  • SPECIFICATIONS:
  •  Tonnage ……………………………    100
  • Stroke ………………………………     3″
  • Speed …………..(Variable)……    120-280 SPM
  • Slide adjustment ……………..…  4″
  • Shut HT (S.D.A.U.) ……………   17-1/2″
  • Bed area ……………………………  31” x 48”
  • Slide area …………………………   18” x 48”

EQUIPPED WITH:

  • Air clutch and brake
  • Dual air counterbalances
  • Automatic recirculating lubrication system
  • 5” Bolster with T-slots
  • Eight point gibbing
  • Tie rod construction
  • Eddy current motor
  • Operator console

RECONDITIONING INCLUDES:

  • Rebuilding air clutch and brake using Minster OEM parts
  • Flushing out and rebuilding lubrication system
  • Installing a Wintriss WPC press control with a Smart Pac
  • 8 Die protection inputs
  • 8 Programmable outputs
  • New electrics
  • Resetting ram

Very Good Condition

 May be seen under power on our floor

 

28 TON SEYI GAP FRAME PRESSES MODEL SN1-28-S [2 AVAILABLE STK# 1234 & 1235] [NEW PRESSES]

Tony Amato

SPECIFICATIONS:

SEYI 28 Ton Single Point Gap Frame Press with the following standard features:

– 28 US (25 metric) Ton Capacity

– SEYI Combination Wet Clutch & Brake

– 3.15″ (80 mm) Stroke Length

– Variable Speed – 70 to 120 SPM

– 0.13″ Tonnage Capacity Rating Point

– 9.06″ Die Height to Top of Bolster (SDAU)

– 1.97″ Die Height Adjustment

– 12.99″ x 9.84″ Slide Area (L to R, F to B)

– 27.56″ x 12.60″ Bolster Area (L to R, F to B)

– 3.35″ Bolster Thickness

– 5 Hp Main Motor with Variable Frequency Drive (specify voltage on Purchase Order)

– Wintriss WPC2000-S6 press control

– Air Counter Balance rated at 119 lbs (54 kg) maximum upper die weight (@ 72 psi)

– Weight – 5,720 lbs (2,600 kg) (Approximate)

– Dims (Footprint) 28-1/2” L/R x 42” F/B x 81” Tall

 

Press Start-Up (5 Days) (Provided by Stamptech)

Start-Up service for one SEYI press. Includes the following:

– Travel to/from plant.

– Perform visual inspection of press and document any damage that may have occurred due to

shipping or handling.

– Verify proper assembly of press by rigging company (when required)

– Verify electrical power connections and transformer wiring. (Customer performs electrical

connections to supply power)

– Verify proper air supply installation. (Customer performs air supply connection to press)

– Verify proper rotation of flywheel and correct if necessary.

– Verify proper lubricants and fill lubricant reservoirs where necessary. (Customer supplies

required lubricants per SEYI-Presses specifications)

– Verify proper operation of the press in all modes (Inch, Micro-Inch, Single and Continuous).

– Provide training of customer personnel in proper setup, operation and maintenance of press.

 

 

SEYI EXCLUSIVE 3 – 2 – 1 YEAR WARRANTY INCLUDED – Details Available Upon Request

 

May be seen under power on our floor

 

60 TON RECONDITIONED MINSTER STRAIGHT SIDED PRESS, MODEL #: P2-60-42, PIECEMAKER SERIAL # 15778 [STK# 1222]

Tony Amato

SPECIFICATIONS:

  • Tonnage …………………………     60
  • Stroke ………………………………  2″
  • Speed …………..(Variable)……  100-300 SPM
  • Slide adjustment ……………..    3″
  • Shut HT (S.D.A.U.) …………    15-1/2″
  • Bed area …………………………   25” x 42”
  • Slide area ………………………    15” x 38”

 EQUIPPED WITH:

  • Air clutch and brake
  • Wintriss resolver based press control with Smart Pac

Includes:

  • Wintriss die pro
  • Wintriss pro cam
  • Wintriss load analyzer
  • Dual air counterbalances
  • Automatic recirculating lubrication system
  • 3” Bolster with T-slots
  • 3-1/2” T-slotted ram plate
  • Eight point gibbing
  • Tie rod construction
  • Eddy current motor
  • Operator console
  • Cleaned and gone thru

Good Condition

 May be seen under power on our floor

60 TON REMANUFACTURED MINSTER STRAIGHT SIDED PRESS, MODEL P2-60-36 PIECEMAKER, S/N 8687 [STK# 1230]

Tony Amato

SPECIFICATIONS:

  • Tonnage ……………………………     60
  • Stroke ………………………………     2”
  • Speed …………..(Variable)……     0-375 SPM
  • Slide adjustment ………….……     3″
  • Shut HT (S.D.A.U.) off bed ……  14”
  • Bed area ……………………………     25″x 36″
  • Slide area ……………………………   15″ x 36″
  • Side window width ………………   12″
  • New energy efficient motor with Yaskawa VFD ……  10 HP
  • Electrics ………………………………  220/ 440/ 3PH
  • Weight Approximate………………  12,500 lbs.

 STAMPTECH’S REMANUFACTURING PROCESS INCLUDES:

  • Complete Press Teardown
  • Cleaning and Inspection of all parts and comparing them to original specifications
  • Remachining of Crown Bearing Bores, Connection Bores, Gibs Slide and Bolster as required to meet specifications
  • Replacement of all Bronze Bushings, Bearings, Oil Seals, Packing and other wear items
  • Installation of a New Lubrication System
  • Installation of a New Pneumatic System
  • Upgrading to the latest Safety requirements
  • Retention of a Permanent Record for the life of the Remanufactured Equipment
  • 1 Year Warranty

 EQUIPPED WITH:

  • Rebuilt air clutch and brake
  • OSHA compliant Cieco resolver based press control
  • Includes:
  • Die Protection
  • Programmable limit switch outputs
  • All new electrics, dual valve, FRL
  • New floor mounted console
  • Vari speed motor drive
  • Bronze Gibbing
  • Dual air counter balances
  • Automatic recirculating lubrication system
  • New bolster plate machined to your specifications
  • Rebuilt lubrication system
  • Vibro Dynamic press mounts

 Press brought back to new machine tolerances

 May be seen under power on our floor.

100 TON REMANUFACTURED MINSTER STRAIGHT SIDED PRESS, MODEL #: P2-100-48 PIECEMAKER, SERIAL # 17076 [STK# 1227]

Tony Amato

SPECIFICATIONS:

  • Tonnage ………………………    100
  • Stroke ……………………………  5″
  • Speed …………..(Variable)…  80-160 SPM
  • Slide adjustment ………….…  4″
  • Shut HT (S.D.A.U.) …………  20″
  • Bed area …………………………  31″ x 48″
  • Slide area ………………………   18″ x 48″
  • Side window width …………    16″
  • Motor …Variable speed …..   15 HP
  • Electrics …………………………  220/ 440/ 3PH
  • Weight Approximate…………  27,000 lbs.

 

STAMPTECH’S REMANUFACTURING PROCESS INCLUDES:

  • Complete Press Teardown
  • Cleaning and Inspection of all parts and comparing them to original specifications
  • Remachining of Crown Bearing Bores, Connection Bores, Gibs Slide and Bolster as required to meet specifications
  • Replacement of all Bronze Bushings, Bearings, Oil Seals, Packing and other wear items
  • Installation of a New Lubrication System
  • Installation of a New Pneumatic System
  • Upgrading to the latest Safety requirements
  • Retention of a Permanent Record for the life of the Remanufactured Equipment
  • 1 Year Warranty

 

EQUIPPED WITH:

  • Air clutch and brake
  • New OSHA compliant Wintriss resolver based press control with Smart Pac

Incudes:

  • Wintriss die pro
  • Wintriss pro cam
  • Wintriss auto set
  • All new electrics
  • Dual air counter balances
  • Automatic recirculating lubrication system
  • New machined bolster
  • Eight point gibbing
  • Tie rod construction
  • Eddy current motor
  • Operator console
  • Front and back light curtains or interlocked hard guards
  • Vibro Dynamic press mounts

 

May be seen under power on our floor.

Excellent condition

60 TON REMANUFACTURED MINSTER STRAIGHT SIDED PRESS, MODEL P2-60-48 PIECEMAKER, S/N 23772, YEAR 1970 [STK# 1232]

Tony Amato

SPECIFICATIONS:

  • Tonnage …………………………     60
  • Stroke ………………………….…     2”
  • Speed …………..(Variable)……   0-200 SPM
  • Slide adjustment ………………    3″
  • Shut HT (S.D.A.U.) off bed …   14-1/2”
  • Bed area ……………………………   25″x 48″
  • Slide area …………………………    15″ x 48″
  • Side window width ……………    12″
  • New energy efficient motor with Yaskawa VFD ……   10 HP
  • Electrics ……………………………   220/ 440/ 3PH
  • Weight Approximate……………   14,000 lbs.

 STAMPTECH’S REMANUFACTURING PROCESS INCLUDES:

  • Complete Press Teardown
  • Cleaning and Inspection of all parts and comparing them to original specifications
  • Remachining of Crown Bearing Bores, Connection Bores, Gibs Slide and Bolster as required to meet specifications
  • Replacement of all Bronze Bushings, Bearings, Oil Seals, Packing and other wear items
  • Installation of a New Lubrication System
  • Installation of a New Pneumatic System
  • Upgrading to the latest Safety requirements
  • Retention of a Permanent Record for the life of the Remanufactured Equipment
  • 1 Year Warranty

 EQUIPPED WITH:

  • Rebuilt air clutch and brake using Minster OEM components
  • OSHA compliant resolver based press control
  • Includes:
  • Die Protection
  • Programmable limit switch outputs
  • All new electrics, dual valve, FRL
  • New floor mounted console
  • New energy efficient motor with Yaskawa VFD
  • Bronze Gibbing
  • Dual air counter balances
  • Automatic recirculating lubrication system
  • New bolster plate machined to your specifications
  • Rebuilt lubrication system
  • Vibro Dynamic press mounts

 Press brought back to new machine tolerances

May be seen under power on our floor.

32 TON REMANUFACTURED MINSTER PRESS, MODEL #B1-32, S/N # 12234 [STK# 1179]

Tony Amato

SPECIFICATIONS:

  • Capacity ……………………………………..…. 32 Ton
  • Length of stroke …………………………..…  2-1/2”
  • Strokes per minute ………(variable) …… 0-400
  • Slide adjustment ……………………………… 2-1/4”
  • Shut height …. (SDAU) …………….………  9”
  • Bed area …………………………………………  15″ x 24″
  • Motor ……………..……………………………… 3 HP
  • Electrics …………………………………………  220/440/3 PH
  • Weight……………………………………………  5,000 lbs

STAMPTECH’S REMANUFACTURING PROCESS INCLUDES:

  • Complete Press Teardown
  • Cleaning and Inspection of all parts and comparing them to original specifications
  • Remachining of Crown Bearing Bores, Connection Bores, Gibs Slide and Bolster as required to meet specifications
  • Replacement of all Bronze Bushings, Bearings, Oil Seals, Packing and other wear items
  • Installation of a New Lubrication System
  • Installation of a New Pneumatic System
  • Upgrading to the latest Safety requirements
  • Retention of a Permanent Record for the life of the Remanufactured Equipment
  • 1 Year Warranty

EQUIPPED WITH:

  • Minster air clutch and brake
  • New energy efficient motor
  • New OSHA compliant Cieco MPPC 1000R press control
  • All new electrics
  • New recirculating lubrication system
  • Flanged Ram
  • Bronze Gibbs
  • Choice of color
  • New bolster plate to your specifications
  • Press mounts
  • ONE YEAR WARRANTY

 May be seen under power on our floor

100 TON RECONDITIONED MINSTER STRAIGHT SIDED PRESS, MODEL # P2-100-48 PIECEMAKER, SERIAL # 11070 [STK# 1228]

Tony Amato

SPECIFICATIONS:

  • Tonnage ……………………………….   100
  • Stroke …………………………………     4″
  • Speed …………..(Variable)………     80-160 SPM
  • Slide adjustment ……………..…       4″
  • Shut HT (S.D.A.U.) ………………    17-1/2″
  • Bed area ………………………………    31” x 48”
  • Slide area ……………………………     18” x 48”

EQUIPPED WITH:

  • Air clutch and brake
  • New OSHA compliant Wintriss resolver based press control with Smart Pac

Includes:

  • Wintriss die pro
  • Wintriss pro cam
  • Dual air counterbalances
  • Automatic recirculating lubrication system
  • 3” Bolster with T-slots
  • Eight point gibbing
  • Tie rod construction
  • Eddy current motor
  • Operator console
  • Machine safety guards

Very Good Condition

 May be seen under power on our floor

1 2