Category : Presses

35 TON RECONDITIONED BLISS OBI POWER PRESS, MODEL HP45747, SN H59575 [STK# 1349]

SPECIFICATIONS:

Capacity…………………………   35 Ton

Length of Stroke  …………..    2”

Slide Adj ……………………..     2-1/2”

Shut Height…(SDAU)……    12-1/2” to Bed

Bed Size ………………………   26-1/2” x 14”

Motor … ………………………   10 HP Reeves

Dimensions…………………   4’ x 4-1/2’ x 8’

EQUIPPED WITH: 

• New dual air valve
• 1-3/4” Bolster plate

May be seen under power on our floor

45 TON RECONDITIONED MINSTER STRAIGHT SIDED PRESS, MODEL P2-45-32 PIECEMAKER, SN 10857 [STK# 1301]

SPECIFICATIONS:

•  Tonnage ………………………………     45
• Stroke …………………………                2″
• Speed …………..(Variable)………      125-250 SPM
• Slide adjustment ……………..……     3″
• Shut HT (S.D.A.U.) ………………      15-1/2″
• Bed area ………………………………     25” x 32”
• Slide area ………………………………    15” x 32”

EQUIPPED WITH:

• Air clutch and brake
• New Osha compliant press control
• All new electrics
• New dual air valve/F.R.L.

• Dual air counterbalances
• Automatic recirculating lubrication system
• 3-1/2” Bolster with T-slots
• Eight point gibbing
• Tie rod construction
• Eddy current motor
• Operator console
• Cleaned and gone thru

22 TON MINSTER C-FRAME PRESS, MODEL B1-22 SN 14445 (4 AVAILABLE) [STK# 1336]

SPECIFICATIONS:

•  Tonnage …………………………   22
• Stroke ……………………………     1 ½”
• Speed …….(Variable)………    Max to 400
• Slide adjustment ………………  2”
• Shut HT (S.D.A.U.) ………     10“ to bed
• Bed area …………………………  20” x  12”
• Slide Area……………. …………  12” x 8”

EQUIPPED WITH:

• Air Clutch and Brake
• Minster OEM Press Control
• 5” Bolster
• Automatic Recirculating Lubrication System
• Eddy Current motor
• Operator console
• Vibro Dynamic Press Mounts

May be seen under power on our floor.                     

30 TONUSED BRUDERER HIGH SPEED PRESS, MODEL# BSTA 30 (4 AVAILABLE) [STK# 1286]

SPECIFICATIONS:

Capacity……………………………    30 Ton

Length of Stroke  ……………..    .315 to 1.57” adj.

Stroke per minute…………….   135-800

Slide Adj ………………………..  1.57”

Shut Height…(SDAU)………  7.874” – 8”

Bed Size …………………………  14” x 21”

Electrics ………………………..   220/3/60

Dims………………………………  7’ H x 3’R-L x 4’ F-B

Weight …………………………   7,000 lbs approx

EQUIPPED WITH: 

• Air Clutch and Brake
• New dual air valve
• Recirculating lubrication system
• Bolster plate
• Light curtains
• Press mounts

May be seen under power on our floor

60 TON REMANUFACTURED MINSTER 60 TON C FRAME PRESS MODEL, # MINSTER #6, S/N # 6-16603, STK# 1274

SPECIFICATIONS:

• Capacity …………………………………  60 Ton
• Length of stroke ……………………    4”
• Strokes per minute ………(fixed)   100
• Slide adjustment ……………………   3”
• Shut height over bolster…. (SDAU)   16”
• Bed area …………………………………  21″ x 32″
• Motor ……………..……………………    10 HP
• Electrics …………………………………  220/440/3 PH
• Weight……………………………………  12,000 lbs.

STAMPTECH’S REMANUFACTURING PROCESS INCLUDES:

• Complete Press Teardown
• Cleaning and Inspection of all parts and comparing them to original specifications
• Remachining of Crown Bearing Bores, Connection Bores, Gibs Slide and Bolster as required to meet specifications
• Replacement of all Bronze Bushings, Bearings, Oil Seals, Packing and other wear items
• Installation of a New Lubrication System
• Installation of a New Pneumatic System
• Upgrading to the latest Safety requirements
• Retention of a Permanent Record for the life of the Remanufactured Equipment
• 1 Year Warranty
• New manuals and wiring diagrams

EQUIPPED WITH:

• New O.E.M. Minster air clutch and brake components
• New energy efficient motor

• New OSHA compliant Cieco MPPC 1100R press control resolver based
• All new electrics
• New recirculating lubrication system
• Flanged Ram
• Bronze Gibbs
• New bolster plate to your specifications
• Press mounts
• ONE YEAR WARRANTY

 May be seen under power on our floor

60 TON REMANUFACTURED MINSTER 60 TON C FRAME PRESS, MODEL # MINSTER #6, S/N # 6F-17939, STK# 1273

SPECIFICATIONS:

• Capacity ……………………………          60 Ton
• Length of stroke …………………         4”
• Strokes per minute ………(fixed)     90
• Slide adjustment ………………           3”
• Shut height over bolster…. (SDAU)   15-1/2”
• Bed area …………………………           21″ x 32″
• Motor ……………..……………             10 HP
• Electrics ………………………              220/440/3 PH
• Weight…………………………              12,000 lbs.

STAMPTECH’S REMANUFACTURING PROCESS INCLUDES:

• Complete Press Teardown
• Cleaning and Inspection of all parts and comparing them to original specifications
• Remachining of Crown Bearing Bores, Connection Bores, Gibs Slide and Bolster as required to meet specifications
• Replacement of all Bronze Bushings, Bearings, Oil Seals, Packing and other wear items
• Installation of a New Lubrication System
• Installation of a New Pneumatic System
• Upgrading to the latest Safety requirements
• Retention of a Permanent Record for the life of the Remanufactured Equipment
• 1 Year Warranty
• New manuals and wiring diagrams

EQUIPPED WITH:

• New O.E.M. Minster air clutch and brake components
• New energy efficient motor

• New OSHA compliant Cieco MPPC 1100R press control resolver based
• All new electrics
• New recirculating lubrication system
• Flanged Ram
• Bronze Gibbs
• New bolster plate to your specifications
• Press mounts
• ONE YEAR WARRANTY

May be seen under power on our floor

60 TON REMANUFACTURED MINSTER C-FRAME PRESS, MODEL # MINSTER #6, S/N 6F-17946 [STK# 1269]

SPECIFICATIONS:

• Capacity ………………………………………………………….. 60 Ton
• Length of stroke ………………………….………………………. 3”
• Strokes per minute ………(fixed) ………………….…………… 90
• Slide adjustment …………………………………………………. 3”
• Shut height over bolster…. (SDAU) ……………….……………. 13”
• Bed area ………………………………………………………….. 21″ x 32″
• Motor ……………..……………………………………………… 10 HP
• Electrics ………………………………………………………….. 220/440/3 PH
• Weight…………………………………………………………….. 12,000 lbs.

STAMPTECH’S REMANUFACTURING PROCESS INCLUDES:

• Complete Press Teardown
• Cleaning and Inspection of all parts and comparing them to original specifications
• Remachining of Crown Bearing Bores, Connection Bores, Gibs Slide and Bolster as required to meet specifications
• Replacement of all Bronze Bushings, Bearings, Oil Seals, Packing and other wear items
• Installation of a New Lubrication System
• Installation of a New Pneumatic System
• Upgrading to the latest Safety requirements
• Retention of a Permanent Record for the life of the Remanufactured Equipment
• 1 Year Warranty
• New manuals and wiring diagrams

EQUIPPED WITH:

• New O.E.M. Minster air clutch and brake components
• New energy efficient motor

• New OSHA compliant Cieco MPPC 1100R press control resolver based
• All new electrics
• New recirculating lubrication system
• Flanged Ram
• Bronze Gibbs
• New bolster plate to your specifications
• Press mounts
• ONE YEAR WARRANTY

May be seen under power on our floor

60 TON RECONDITIONED MINSTER STRAIGHT SIDED PRESS, MODEL # P2-60-36 PIECEMAKER, SERIAL # 21758, [STK# 1252]

SPECIFICATIONS:

• Tonnage …………………………      60
• Stroke ……………………………      2″
• Speed …………..(Variable)…      0-400 SPM
• Slide adjustment ……………..     3″
• Shut HT (S.D.A.U.) ……………   14-1/2″
• Bed area ……………………………   25” x 36”
• Slide area …………………………    15” x 32-1/2”

EQUIPPED WITH:

• Rebuilt air clutch and brake using OEM parts
• New Osha compliant press control
• All new electrics
• New dual air valve/F.R.L.

• Dual air counterbalances
• Automatic recirculating lubrication system
• 3-1/2” Bolster
• Eight point gibbing
• Tie rod construction
• Eddy current motor
• Operator console
• Cleaned and gone thru

Good Condition

May be seen under power on our floor

60 TON RECONDITIONED MINSTER STRAIGHT SIDED PRESS, MODEL #: P2-60-36 PIECEMAKER, S/N 14568, [STK# 1249]

SPECIFICATIONS:

• Tonnage …………………………    60
• Stroke ……………………………     2″
• Speed …………..(Variable)…    125/375 SPM
• Slide adjustment …………….    3″
• Shut HT (S.D.A.U.) …………    14-1/2″
• Bed area …………………………   25” x 36”
• Slide area ………………………    15” x 32-1/2”

 EQUIPPED WITH:

• Air clutch and brake
• New Osha compliant press control
• All new electrics
• New dual air valve/F.R.L.

• Dual air counterbalances
• Automatic recirculating lubrication system
• 3-1/2” Bolster with T-slots
• Eight point gibbing
• Tie rod construction
• Eddy current motor
• Operator console
• Cleaned and gone thru

Good Condition

 May be seen under power on our floor

60 TON RECONDITIONED MINSTER STRAIGHT SIDED PRESS, MODEL #: P2-60-42, PIECEMAKER SERIAL # 15778 [STK# 1222]

SPECIFICATIONS:

• Tonnage …………………………     60
• Stroke ………………………………  2″
• Speed …………..(Variable)……  100-300 SPM
• Slide adjustment ……………..    3″
• Shut HT (S.D.A.U.) …………    15-1/2″
• Bed area …………………………   25” x 42”
• Slide area ………………………    15” x 38”

 EQUIPPED WITH:

• Air clutch and brake
• Wintriss resolver based press control with Smart Pac

Includes:

• Wintriss die pro
• Wintriss pro cam
• Wintriss load analyzer

• Dual air counterbalances
• Automatic recirculating lubrication system
• 3” Bolster with T-slots
• 3-1/2” T-slotted ram plate
• Eight point gibbing
• Tie rod construction
• Eddy current motor
• Operator console
• Cleaned and gone thru

Good Condition

 May be seen under power on our floor