SPECIFICATIONS:
-
- Max Stock Width = 12″
- Min/Max. Thickness Capacity = 0.020-0.175
- Straightening Rolls = 11
- Diameter of Roll = 3″
- Feed Rate (Variable) = 30-90 FPM
- HP = 5
- Dimensions = 54″ x 31″ x 52″ Tall
- Electrics = 220/440/3PH
- Weight Approx. = 1,500 lbs
EQUIPPED WITH:
-
- Eleven rolls straightener, All Rolls Powered
- 3″ or 4″ Diameter Rolls, Hardened and Ground
- Seven Straightening Rolls (Three Over Four)
- Two sets of pinch rolls
- All rolls mounted on heavy duty anti-friction lifetime bearings
- Variable speed drive, 3 to 1 ratio
- 220 or 400 volt, 3 phase, 60 hertz
- Speed range of 30 to 90 F.P.M.
- Air clutch and air brake
- Air filter, regulator and gauge
- Maximum air pressure required 80 P.S.I.
- Jog forward and jog reverse
- Automatic run through loop control
- Entry and exit roller guides
- Top three straightening rolls are simultaneously adjustable with one handle, through a 60 to 1 speed reducer
- Straightening rolls elevated with one handle
- Straighteners are designed to pull material from top or coil only
- Standard pass line height is 45″
May Be Seen Under Power on Our Floor.