Category : Straight Sided Presses

150 TON MINSTER SSDC PRESS, MODEL P2-150-60 PIECEMAKER, S/N 23091 [STK# 1534]

SPECIFICATIONS:

• Tonnage …………………………………………………… 150
• Stroke ……………………………………………………… 6”
• Speed …………. (Variable)………………………………. 40 – 80 SPM
• Slide Adjustment …………………………………………. 4”
• Shut Height (S.D.A.U.) …………………………………… 21”
• Bed Area ………………………………………………….. 60” L-R x 40” F-B
• Slide Area …………………………………………………. 60” L-R x 40” F-B
• Side Window Width ………………………………………. 20”
• Motor …………………….……………………………….  20 HP
• Electrics …………………………………………………… 230/460V/60HZ/3PH
• Weight (approx.) …………………………………………. 57,000 lbs

 EQUIPPED WITH:

• Air Clutch and Brake
• Recirculating Lubrication System
• OEM Minster Press Control
• Eight Point Gibbing
• Tie Rod Construction
• Dual Air Counterbalances
• T-Slotted Bolster Plate
• Floor Mounted Console
• (4) Isolation Mounts

May be seen under power on our floor

200 TON MINSTER SSDC PRESS, MODEL# E2-200-54 HEVI STAMPER, S/N 19161 [STK# 1533]

SPECIFICATIONS:

• Tonnage ……………………………….………………………. 200
• Stroke …………………………………………………………. 6”
• Speed …………. (Variable)…………………………………… 50 – 150 SPM
• Slide Adjustment …………….……….……………………….  6”
• Shut Height (S.D.A.U.) ………………………………………. 22”
• Bed Area ……………………………………………………… 54” L-R x 36” F-B
• Slide Area ……………………………………………………. 54” L-R x 36” F-B
• Side Window Width …………………………………………. 18”
• Motor …………………………………………………………. 30 HP
• Electrics ………………………………………………………. 230/460V/60HZ/3PH
• Weight (approx) ………………………………………………. 55,000 lbs
• Dimensions (approx) …………………………………………. 94” L-R x 69” F-B x 179” H

 EQUIPPED WITH:

• Air Clutch and Brake

• Dual Air Counterbalances
• Single Back Geared Twin End Drive
• Automatic Recirculating Lubrication System
• Eight Point Gibbing
• Tie Rod Construction
• Floor Operator Control Console
• T-Slotted Bolster
• Electric Ram Adjust with Shut Height Indicator
• (4) Isolation Mounts

 VERY GOOD CONDITION

200 TON MINSTER SSDC PRESS, MODEL# E2-200-54 HEVI STAMPER, S/N 15171 [STK# 1449]

SPECIFICATIONS:

• Tonnage ……………………………….………………………. 200
• Stroke …………………………………………………………. 6”
• Speed …………. (Variable)…………………………………… 0 – 120 SPM
• Slide Adjustment …………….……….……………………….  6”
• Shut Height (S.D.A.U.) ………………………………………. 20”
• Bed Area ……………………………………………………… 54” L-R x 36” F-B
• Slide Area ……………………………………………………. 54” L-R x 36” F-B
• Side Window Width …………………………………………. 18”
• Motor …………………………………………………………. 30 HP
• Electrics ………………………………………………………. 230/460V/60HZ/3PH
• Weight (approx) ………………………………………………. 55,000 lbs
• Dimensions (approx) …………………………………………. 94” L-R x 69” F-B x 179” H

 EQUIPPED WITH:

• Air Clutch and Brake

• Dual Air Counterbalances
• Single Back Geared Twin End Drive
• Automatic Recirculating Lubrication System
• Wintriss WPC with Smart Pac Pro

• 8 Die protection inputs
• 8 PLS Outputs
• Eight Point Gibbing
• Tie Rod Construction
• Floor Operator Control Console
• T-Slotted Bolster
• Electric Ram Adjust with Shut Height Indicator
• (4) Isolation Mounts

 VERY GOOD CONDITION

30 TON MINSTER STRAIGHT SIDED PRESS, MODEL P2-30-24, S/N 24454 [STK# 1542]

SPECIFICATIONS:

• Tonnage ……………………………….……………………….  30
• Stroke …………………………………………………………. 1”
• Speed …………. (Variable)…………………………………… 0 – 500  SPM
• Slide Adjustment …………….……….……………………….  2”
• Shut Height (S.D.A.U.) ………………………………………. 5”
• Bed Area ……………………………………………………… 24” L-R x 19” F-B
• Slide Area ……………………………………………………. 24” L-R x 19” F-B
• Side Window Width …………………………………………. 5”
• Motor …………………………………………………………. 10 HP
• Electrics ………………………………………………………. 230/460V/60HZ/3PH
• Weight (approx) ………………………………………………. 8,000 lbs

EQUIPPED WITH:

• Air Clutch and Brake

• Dual Air Counterbalances
• OEM OSHA Compliant Minster Press Controls
• 30” STI Light Curtains Front & Back
• Automatic Recirculating Lubrication System
• Eight Point Gibbing
• T-Slotted Ram
• Tie Rod Construction
• Eddy Current Motor
• Floor Operator Control Console
• 2” T-Slotted Bolster (Center Cutout ……. 10” L-R x 4.5” F-B)
• (4) Isolation Mounts

 May be seen under power on our floor

30 TON MINSTER STRAIGHT SIDED PRESS, MODEL P2-30-24, S/N 24150 [STK# 1541]

SPECIFICATIONS:

• Tonnage ……………………………….……………………….  30
• Stroke …………………………………………………………. 1”
• Speed …………. (Variable)…………………………………… 0 – 500  SPM
• Slide Adjustment …………….……….……………………….  2”
• Shut Height (S.D.A.U.) ………………………………………. 5”
• Bed Area ……………………………………………………… 24” L-R x 19” F-B
• Slide Area ……………………………………………………. 24” L-R x 19” F-B
• Side Window Width …………………………………………. 5”
• Motor …………………………………………………………. 10 HP
• Electrics ………………………………………………………. 230/460V/60HZ/3PH
• Weight (approx) ………………………………………………. 8,000 lbs

 EQUIPPED WITH:

• Air Clutch and Brake

• Dual Air Counterbalances
• OEM OSHA Compliant Minster Press Controls
• 30” STI Light Curtains Front & Back
• Automatic Recirculating Lubrication System
• Eight Point Gibbing
• T-Slotted Ram
• Tie Rod Construction
• Eddy Current Motor
• Floor Operator Control Console
• 2” T-Slotted Bolster (Center Cutout ……. 10” L-R x 4.5” F-B)
• (4) Isolation Mounts

 May be seen under power on our floor

150 TON REMANUFACTURED MINSTER STRAIGHT SIDED PRESS, MODEL P2-150-54 PIECE MAKER, S/N # 17810 [STK# 1516]

SPECIFICATIONS:

• Tonnage …………………………………………………… 150
• Stroke ……………………………………………………… 6”
• Speed …..(Variable) ………………………………………. 0-90 SPM
• Slide Adjustment …………………………………………… 4”
• Shut Height (S.D.A.U.) …………………………………… 23”
• Bed area …………………………………………………… 54” L-R x 40” F-B
• Slide area …………………………………………………. 54” L_R x 18” F-B
• Side Window Width ………………………………………. 20”
• Motor …Variable speed …………………………………… 30 HP
• Electrics …………………………………………………… 220/440V/60HZ/3PH
• Weight (approx.) ……………………………………………49,000 lbs.

STAMPTECH’S REMANUFACTURING PROCESS INCLUDES:

• Complete Press Teardown
• Cleaning and Inspection of all parts and comparing them to original specifications
• Re-machining of Crown Bearing Bores, Connection Bores, Gibs Slide and Bolster as required to meet specifications
• Replacement of all Bronze Bushings, Bearings, Oil Seals, Packing and other wear items
• Installation of a New Lubrication System
• Installation of a New Pneumatic System
• Upgrading to the latest Safety requirements
• Retention of a Permanent Record for the life of the Remanufactured Equipment
• 1 Year Warranty

EQUIPPED WITH:

• Air clutch and brake
• Electric ram adjust with digital indicator
• OSHA compliant Wintress resolver-based press control with Smartpac
• Includes:
• Die Protection
• Programmable limit switch
• Tonnage monitor
• Floor mounted console
• Vari speed motor drive
• Bronze Gibbing
• Dual air counterbalances
• Automatic recirculating lubrication system
• Bolster plate
• Rebuilt lubrication system
• Press mounts

Press is brought back to New Machine Tolerances

INCLUDED OPTIONS

 Light Curtains

Front & Back light curtains

Servo Feed

New CWP SMX18

• Maximum Thickness   .125”
• Maximum Width        18”

Straightener

New CWP 24C

• Maximum Thickness   .187”
• Maximum Width        24”

Includes:

• Exit Cascade Rolls
• Angled Head
• 50 FPM Modulating Drive
• Laser Loop Control
• Air Lift Entry Roll
• Dial Indicators

Stock Reel

New CWP 4R-24 Non-Motorized Stock Reel

• Maximum Width        24”
• Maximum Weight       6,500 lbs.
• Maximum OD             60”
• ID Range                     13-17”

45 TON MINSTER STRAIGHT SIDED PRESS, MODEL: P2-45-36, SERIAL #14293 [STK# 1456]

SPECIFICATIONS:

•  Tonnage ………………   45
• Stroke ……………………  5”
• Speed …. (Variable)     400   SPM
• Slide Adjustment ……  1”
• Shut Height (S.D.A.U.)  15”
• Bed Area …………………   36” R-L x 25” F-B
• Slide Area ………………    33 ½” R-L x 15” F-B
• Side Window Width …  12”
• Motor ……………………    10 HP
• Electrics …………………   230/460V/60HZ/3PH
• Weight (approx) ……     18,000 lbs

 EQUIPPED WITH:

• Air Clutch and Brake

• Dual Air Counterbalances
• Automatic Recirculating Lubrication System
• Eight Point Gibbing
• Tie Rod Construction
• Eddy Current Motor

100 TON RECONDITIONED MINSTER STRAIGHT SIDED PRESS, MODEL P2-100-36 PIECEMAKER, S/N 18409, STK# 1399

SPECIFICATIONS:

• Tonnage …………………………………………………… 100
• Stroke ……………………………………………………… 5”
• Speed …………. (Variable)………………………………. 75 – 150 SPM
• Slide Adjustment …………………………………………. 4”
• Shut Height (S.D.A.U.) …………………………………… 22”
• Bed Area …………………………………………………. 36” L-R x 31” F-B
• Slide Area …………………………………………………. 36” L-R x 20” F-B
• Side Window Width ………………………………………. 16”
• Motor (Variable Speed) ….……………………………….. 20 HP
• Electrics …………………………………………………… 230/460V/60HZ/3PH
• Weight (approx.) …………………………………………. 25,000 lbs.

STAMPTECH’S RECONDITIONING PROCESS INCLUDES:

• Cleaning and Inspection of parts and comparing them to original specifications
• Re-machining of Connection Bores, Gibbs Slide and Bolster as required to meet specifications
• Rebuilding of Lubrication System
• Rebuilding of Pneumatic System
• Rebuilding of Clutch/Brake
• Rebuilding of counterbalances

EQUIPPED WITH:

• Air Clutch and Brake
• Digital Shut Height Indicator
• OSHA compliant Cieco Resolver-based Press Control with Automator I
• Includes:
• Die Protection
• Programmable Limit Switch
• Floor Mounted Console
• Vari Speed Motor Drive
• Bronze Gibbing
• Eight Point Gibbing
• Tie Rod Construction
• Eddy Current Motor
• Dual Air Counterbalances
• Automatic Recirculating Lubrication System
• 5” Bolster Plate
• Rebuilt Lubrication System
• Press Mounts

100 TON RECONDITIONED MINSTER STRAIGHT SIDED PRESS, MODEL P2-100-36 PIECEMAKER, S/N 13874 [STK# 1401]

SPECIFICATIONS:

• Tonnage ……………………        100
• Stroke ………………………        5”
• Speed …………..(Variable)     0 – 150 SPM
• Slide adjustment ……………  4”
• Shut HT (S.D.A.U.) ………   22”
• Bed area ………………………  31”x 36”
• Slide area ……………………   18-1/2” x 36”
• Side window width ………   16”
• Motor …Variable speed     20 HP
• Electrics ……………………    230/460

 STAMPTECH’S RECONDITIONING PROCESS INCLUDES:

• Cleaning and Inspection of  parts and comparing them to original specifications
• Re-machining of Connection Bores, Gibbs Slide and Bolster as required to meet specifications
• Rebuilding of  Lubrication System
• Rebuilding of Pneumatic System
• Rebuilding of Clutch/Brake
• Rebuilding of counterbalances

EQUIPPED WITH:

• Air clutch and brake
• Digital shut height indicator
• OSHA compliant Cieco resolver based press control with Automator I
• Includes:
• Die Protection
• Programmable limit switch
• Floor mounted console
• Vari speed motor drive
• Bronze Gibbing
• Dual air counter balances
• Automatic recirculating lubrication system
• Bolster plate
• Rebuilt lubrication system
• Press mounts

60 TON MINSTER STRAIGHT SIDED PRESS, MODEL #: P2-60-42, SN#21495 [STK# 1381]

SPECIFICATIONS:

• Tonnage ………………………         60
• Stroke …………………………         3″
• Speed …………..(Variable)        0-250 SPM
• Slide adjustment …………         3″
• Shut HT ……………………           15-1/2″ to bed
• Bed area ……………………          25” x 42”
• Slide area ……………………        15” x 42”

 EQUIPPED WITH:

• Air clutch and brake

• Dual air counterbalances
• Automatic recirculating lubrication system
• 3-1/2” Bolster
• Eight point gibbing
• Tie rod construction
• Eddy current motor
• Operator console
• Cleaned and gone thru

May be seen under power on our floor