![HANSFORD DIE HANDLER [STK# 1485]](https://stamptechinc.com/wp-content/uploads/2024/07/1485-hansford-die-handler-960x675.jpg)
by stamp1986 | Jul 25, 2024
SPECIFICATIONS: Lower Platen = 24″ x 44.5″ Upper Platen = 24″ x 44.5″ /Adjustable Mounting Plates Shut Height = 8″ Upper Platen Movement = Vertical – 20″ Vertical Movement (Power) = 13″ Min Vertical Movement (Hand Crank) =...
![CINCINNATI 144″ WIDE HYDRAULIC SHEAR [STK# 1281]](https://stamptechinc.com/wp-content/uploads/2024/07/1281-cincinnati-144-wide-hydraulic-shear-960x675.jpg)
by stamp1986 | Jul 25, 2024
SPECIFICATIONS: Max Cutting Width = 144″ Cutting Thickness (Mild Steel) = 1/2″ Strokes Per Minute = 30 Height of Table Above Floor = 42″ Number of Hold Downs = 15 Hold Down Tonnage = 26-1/2 Ton Gap Length = 16″ Rake Angle = 7/16″ Motor =...
![20 TON MINSTER DIE CUSHION [STK# 877]](https://stamptechinc.com/wp-content/uploads/2024/07/877-20-ton-minster-die-cushion-960x675.jpg)
by stamp1986 | Jul 25, 2024
SPECIFICATIONS: Tonnage (at 10 P.S.1) = 1.27 Cushion Draw = 0″-4″ Standard Pin Pads L-R = 19″ F-B = 19″ Circle = 16″ Height Standard Draw = 22″ Mounting May Be Made to the Bolster Plate, Press Frame or to the...
