Category : C-Frame Presses

32 TON MINSTER PRESS, MODEL B1-32 FIXED BASE, S/N 14716 [STK# 1539]

SPECIFICATIONS:

• Tonnage …………………………………………….    32
• Stroke ……………………………………………….   1.5”
• Speed …. (Fixed) …………………………………..   400 SPM
• Slide Adjustment ……………………………………   2.25”
• Shut Height (S.D.A.U.) …………………………….    9.5”
• Ram Size ……………………………………………   14.25” L-R x 7.5” F-B

• Bed Area …………………………………………… 24” L-R x 15” F-B
• Motor …………….…………………………………  3 HP
• Electrics ……………………………………………. 220/440V/60HZ/3PH
• Weight (approx.) …….…..…………………………. 4,900 lbs.

 EQUIPPED WITH: 

• Minster Air Clutch and Brake
• OSHA Compliant Press Control with Time-based Brake Monitor
• Dual Safety Clutch Valve
• Recirculating Lubrication System
• Floor Operator Control Console
• 2” Bolster  (Center Cutout …….15” L-R x 4.5” F-B)
• (4) Isolation Mounts

60 TON REMANUFACTURED MINSTER C FRAME PRESS, MODEL # MINSTER #6, S/N # 6-15997, STK# 1445

SPECIFICATIONS:

• Capacity ………………………………………………………….. 60 Ton
• Length of stroke ………………………….………………………. 4”
• Strokes per minute ………(fixed) ………………….…………… 90
• Slide adjustment …………………………………………………. 3”
• Shut height over bolster…. (SDAU) ……………….……………. 13”
• Bed area ………………………………………………………….. 21″ x 32″
• Motor ……………..……………………………………………… 10 HP
• Electrics ………………………………………………………….. 220/440/3 PH
• Weight…………………………………………………………….. 12,000 lbs.

STAMPTECH’S REMANUFACTURING PROCESS INCLUDES:

• Complete Press Teardown
• Cleaning and Inspection of all parts and comparing them to original specifications
• Remachining of Crown Bearing Bores, Connection Bores, Gibs Slide and Bolster as required to meet specifications
• Replacement of all Bronze Bushings, Bearings, Oil Seals, Packing and other wear items
• Installation of a New Lubrication System
• Installation of a New Pneumatic System
• Upgrading to the latest Safety requirements
• Retention of a Permanent Record for the life of the Remanufactured Equipment
• 1 Year Warranty
• New manuals and wiring diagrams

EQUIPPED WITH:

• New O.E.M. Minster air clutch and brake components
• New energy efficient motor

• New OSHA compliant Cieco MPPC 1100R press control resolver based
• All new electrics
• New recirculating lubrication system
• Flanged Ram
• Bronze Gibbs
• New bolster plate to your specifications
• Press mounts
• ONE YEAR WARRANTY

May be seen under power on our floor

15 TON PERKINS C-FRAME PRESS, MODEL 15-S, S/N 31010 [STK# 1425]

SPECIFICATIONS:
• Tonnage ……………………   15
• Stroke ………………………   1.5”
• Speed …….(Variable)…   0-600 max
• Slide adjustment ………   2.25”
• Shut HT (S.D.A.U.) …     7-1/2”
• Bed area …………………    20” x 10”
• Slide Area……………..…   10” x 10”

EQUIPPED WITH:
• Air Clutch and Brake
• OEM Press Control
• 2” Bolster
• Automatic Recirculating Lubrication System
• Variable speed motor
• Operator console

60 TON REMANUFACTURED MINSTER 60 TON C FRAME PRESS MODEL, # MINSTER #6, S/N # 6-16603, STK# 1274

SPECIFICATIONS:

• Capacity …………………………………  60 Ton
• Length of stroke ……………………    4”
• Strokes per minute ………(fixed)   100
• Slide adjustment ……………………   3”
• Shut height over bolster…. (SDAU)   16”
• Bed area …………………………………  21″ x 32″
• Motor ……………..……………………    10 HP
• Electrics …………………………………  220/440/3 PH
• Weight……………………………………  12,000 lbs.

STAMPTECH’S REMANUFACTURING PROCESS INCLUDES:

• Complete Press Teardown
• Cleaning and Inspection of all parts and comparing them to original specifications
• Remachining of Crown Bearing Bores, Connection Bores, Gibs Slide and Bolster as required to meet specifications
• Replacement of all Bronze Bushings, Bearings, Oil Seals, Packing and other wear items
• Installation of a New Lubrication System
• Installation of a New Pneumatic System
• Upgrading to the latest Safety requirements
• Retention of a Permanent Record for the life of the Remanufactured Equipment
• 1 Year Warranty
• New manuals and wiring diagrams

EQUIPPED WITH:

• New O.E.M. Minster air clutch and brake components
• New energy efficient motor

• New OSHA compliant Cieco MPPC 1100R press control resolver based
• All new electrics
• New recirculating lubrication system
• Flanged Ram
• Bronze Gibbs
• New bolster plate to your specifications
• Press mounts
• ONE YEAR WARRANTY

 May be seen under power on our floor

60 TON REMANUFACTURED MINSTER 60 TON C FRAME PRESS, MODEL # MINSTER #6, S/N # 6F-17939, STK# 1273

SPECIFICATIONS:

• Capacity ……………………………          60 Ton
• Length of stroke …………………         4”
• Strokes per minute ………(fixed)     90
• Slide adjustment ………………           3”
• Shut height over bolster…. (SDAU)   15-1/2”
• Bed area …………………………           21″ x 32″
• Motor ……………..……………             10 HP
• Electrics ………………………              220/440/3 PH
• Weight…………………………              12,000 lbs.

STAMPTECH’S REMANUFACTURING PROCESS INCLUDES:

• Complete Press Teardown
• Cleaning and Inspection of all parts and comparing them to original specifications
• Remachining of Crown Bearing Bores, Connection Bores, Gibs Slide and Bolster as required to meet specifications
• Replacement of all Bronze Bushings, Bearings, Oil Seals, Packing and other wear items
• Installation of a New Lubrication System
• Installation of a New Pneumatic System
• Upgrading to the latest Safety requirements
• Retention of a Permanent Record for the life of the Remanufactured Equipment
• 1 Year Warranty
• New manuals and wiring diagrams

EQUIPPED WITH:

• New O.E.M. Minster air clutch and brake components
• New energy efficient motor

• New OSHA compliant Cieco MPPC 1100R press control resolver based
• All new electrics
• New recirculating lubrication system
• Flanged Ram
• Bronze Gibbs
• New bolster plate to your specifications
• Press mounts
• ONE YEAR WARRANTY

May be seen under power on our floor