Category : Straighteners

BRUDERER 19 ROLL PRECISION STRAIGHTENER [STK# 1302]

SPECIFICATIONS:

Max Material Width …………………………………………   4.72”

Max Material Thickness ……………………………………   0.040”

Diameter of Straightening Rolls ………………………….   0.400”

Number of Power Driven Straightening Rolls …………..   19

Speed ……………………………………………………….    19.7 – 43.9 FPM

Distance Feed Line To Floor ……………………………..   38-1/2”

Dimensions ……………………………………………….      29” x 26” x 52”

Weight ………………………………………………………     1,800 Lbs

EQUIPPED WITH:

Adjustable Upper Straightening Rolls

Variable Speed Stock Feed

(4) Dial Indicators for Top Roll Adjustment

Electrical Controls

Power Lube System

May be seen under power on our floor

AMERICAN STEEL LINE 12” WIDE MOTORIZED STRAIGHTENER, MODEL 3-11, S/N 7394 [STK#1268 ]

SPECIFICATIONS:

• Max stock width                                                  12”
• Min/Max. thickness capacity                           .020/.175
• Straightening rolls                                                11
• Diameter of roll                                                    3”
• Feed rate (variable)                                             30/90 FPM
• HP                                                                          5
• Dimensions                                                           54” x 31” x 52” Tall
• Electrics                                                                 220/440/3PH
• Weight Approx.                                                    1,500 lbs

EQUIPPED WITH:

• Eleven rolls straightener, All Rolls Powered
• 3” or 4” Diameter Rolls, Hardened and Ground
• Seven Straightening Rolls (Three Over Four)
• Two sets of pinch rolls
• All rolls mounted on heavy duty anti-friction lifetime bearings
• Variable speed drive, 3 to 1 ratio
• 220 or 400 volt, 3 phase, 60 hertz
• Speed range of 30 to 90 F.P.M.
• Air clutch and air brake
• Air filter, regulator and gauge
• Maximum air pressure required 80 P.S.I.
• Jog forward and jog reverse
• Automatic run through loop control
• Entry and exit roller guides
• Top three straightening rolls are simultaneously adjustable with one handle, through a 60 to 1 speed reducer
• Straightening rolls elevated with one handle
• Straighteners are designed to pull material from top or coil only
• Standard pass line height is 45”

May be seen under power on our floor.

BRUDERER 15-1/2” WIDE 19 ROLL PRECISION STRAIGHTENER, MODEL 18400-500.1, SERIAL # 40117, YEAR 1973 [STK# 1217]

SPECIFICATIONS:

Max. Material Width……………………………     15-1/2”
Material Thickness Min/Max ………………     .010/.070”
No. of Straightening Rolls (power driven)      19
Diameter of Straightening Rolls……………      .071”
Speed Variable
All Rolls are Backed Up
Motor HP …………………………………………        1-1/2
Electrics ……………………………………………       230/480
Approx. Dimensions …………………………        36” x 46” x 48” Tall
Approx. Weight ………………………………          2,000 lbs.

All rolls reground
All new electrics

Excellent Condition

May be seen under power on our floor

RECONDITIONED BRUDERER FLATTENER, MODEL# 10-120, S/N 300032 [STK# 1138]

SPECIFICATIONS:
Max Material Width ………………………  4.72”
Max Material Thickness …………………  0.040”
Diameter of Straightening Rolls ……… 0.400”
Number of Power Driven Straightening Rolls …… 19
Speed ……………………………………………  19.7 – 43.9 FPM
Distance Feed Line To Floor …………… 38-1/2”
Dimensions …………………………………   29” x 26” x 52”
Weight ………………………………………     1,800 Lbs

EQUIPPED WITH:
Adjustable Upper Straightening Rolls
Variable Speed Stock Feed
(4) Dial Indicators for Top Roll Adjustment
Electrical Controls
Power Lube System

Excellent Condition