35 TON STAMTEC GAP FRAME PRESS [STK# 1645]

by stamp1986 | Mar 3, 2026

SPECIFICATIONS: Tonnage = 35 Stroke = 2.758″ Speed (Variable) = 40-120 SPM Full Tonnage Off Bottom = 0.126″ Slide Adjustment = 2.167″ Shut HT (S.D.A.U. over Bolster) = 8.668″ Bed Area = 31.52″ L-R x 15.76″ F-B Slide Area =...

150 TON MINSTER FIXED BASE PRESS [STK# 1640]

by stamp1986 | Dec 19, 2025

SPECIFICATIONS: Tonnage = 150 Ton Stroke = 10″ Speed (Fixed) = 0-70 Slide Adjustment = 6″ Shut Height (SDAU) at 22.50″ Slide Area = 36″ L-R x 24″ F-B Bed Area = 50” L-R x 30” F-B Motor = 25 HP Electrics = 220/480V/60HZ/3PH Weight...

60 TON SUTHERLAND GAP FRAME PRESS [STK# 1568]

by stamp1986 | Jan 6, 2025

SPECIFICATIONS: Tonnage = 60 Tons Stroke = 2.36″ Speed (Variable) = 0-120 SPM Slide Adjustment = 2.95″ Shut Height (S.D.A.U.) = 13.38″ Maximum Tonnage Point = 0.08″ Off Bottom Bed Area = 35.43″ L-R x 19.68″ F-B Slide Area =...

22 TON FEDERAL GAP FRAME PRESS [STK# 1515]

by stamp1986 | Nov 21, 2024

SPECIFICATIONS: Tonnage = 22 Stroke = 2.5″ Speed (Fixed) = 150 SPM Slide Adjustment = 2″ Shut HT (S.D.A.U.) = 10.5″ Bed Area = 20″ L-R x 12″ F-B Motor = 3 HP Electrics = 220/440V/60HZ/3PH Weight (Approx.) = 4,500 lbs. EQUIPPED WITH: Air...

121 TON AIDA SINGLE POINT GAP FRAME PRESS [STK# 1552]

by stamp1986 | Jul 10, 2024

SPECIFICATIONS: Tonnage = 121 Stroke = 7″ Speed (Variable) = 35 – 65 SPM Slide Adjustment = 3.5″ Shut Height (S.D.A.U.) Above Bolster = 13.7″ Ram Size = 24.5″ L-R x 20.5″ F-B Bed Size = 37″ L-R x 22″ F-B Motor = 10 HP...